Features of the hinge type internal swing lower suspension hardware system
① High load-bearing capacity, high safety, and high service life: The product can be opened, inverted, and closed more than 200000 times on a window sash weighing 100kg, and only needs to pass 25000 tests according to national standards.
② High installation efficiency: The installation of the entire hardware set only requires tightening 13 screws to complete the installation, increasing efficiency by 30% and achieving an installation efficiency of no more than 5 minutes per set.
The installation of the angle sensor adopts a buckle type, which is fast to install, does not damage the aluminum alloy groove, and has a sensitive anti misoperation response without jamming.
The diagonal pull rod and hinge are connected by a snap fit method, which does not require the use of auxiliary tools and is more convenient to install.
③ Adjustable: With three-dimensional adjustable function, the window can be adjusted appropriately to achieve the best usage state.
④ Preferred materials: The main load-bearing components of the sport are made of high-quality 304 stainless steel, structural carbon steel, and high-strength aluminum alloy materials, which are wear-resistant, improve strength, enhance load-bearing capacity, quality, safety, and repeated service life.
⑤ Rigorous design, scientific testing, and leading technology: The product undergoes rigorous fatigue and strength testing during the design phase, with a 50% increase in safety factor for all standards. Our own laboratory repeatedly tests the hardware usage frequency and lifespan, and all components adopt industry-leading design and production processes. The product quality meets European standards for similar products, with a warranty period of 10 years.
⑥ High smoothness and strong corrosion resistance: Each product surface is smooth and free of burrs, and the surface quality of the product is significantly better than similar hardware. The product surface has been systematically optimized, and the neutral salt spray test of the product exceeds 1000 hours.
⑦ High cost-effectiveness: As an international brand, we always adhere to European quality while providing consumers with favorable domestic prices.
Features of hidden internal swing down suspension hardware system
① Strong selectivity: The hidden hinge allows for free selection of handle colors, and non base handles, square axis handles, and fork handles can all be selected and used.
② Good energy-saving and sound insulation effect: No need to cut the sealing strip during installation, which improves the sealing, energy-saving and sound insulation performance of the entire window.
③ High installation efficiency: The installation of the entire hardware set only requires tightening 11 screws to complete the installation. Self positioning installation increases efficiency by 30% and can achieve installation efficiency of no more than 5 minutes per set.
④ Convenient device for disassembling and reassembling window sashes: The hinges are fixed with clamp nuts, which are safe and reliable, do not damage the profiles, and are durable. Plastic bullets the design of the spring washer makes installation easy and prevents loosening.
⑤ Adjustable: With three-dimensional adjustable function, the window can be adjusted appropriately to achieve the best usage state.
⑥ Preferred Material: The main motion friction components are made of high-quality 304 stainless steel stamping, ensuring wear resistance, improving load-bearing capacity, quality, and safety.
⑦ Large opening angle: It is currently one of the few hardware manufacturers in the industry that can achieve 180 ° opening, providing users with greater opening and enjoying safe space.
⑧ Rigorous design, scientific testing, and leading technology: The product undergoes rigorous fatigue and strength testing during the design phase, with a 50% increase in safety factor for all standards. Our own laboratory repeatedly tests the hardware usage frequency and lifespan, and all components adopt industry-leading design and production processes. The product quality meets European standards for similar products, with a warranty period of 10 years.
⑨ New product and new feature: With a cushioned diagonal pull rod, it can be easily closed and opened, enjoying freedom and tranquility.
⑩ High load-bearing capacity, high safety, high service life: With a load-bearing capacity of 100KG, it can be repeatedly opened and closed 50000 times, meeting the national standard requirement of 25000 times. The core components are made of high-quality 304 stainless steel, which is safer and more attentive.
⑪ High smoothness and strong corrosion resistance: Each product surface is smooth and free of burrs, and the surface quality of stainless steel stamping parts is significantly better than similar hardware. The product surface has been systematically optimized, and the neutral salt spray test of the product exceeds 1000 hours.
⑫ High cost-effectiveness: As an international brand, we always adhere to European quality while providing consumers with discounted prices.
Structural characteristics and advantages of hidden internal swing hardware system:
① Strong selectivity: The hidden hinge allows for free selection of handle colors, and non base handles, square axis handles, and fork handles can all be selected and used.
② Good energy-saving and sound insulation effect: No need to cut the sealing strip during installation, which improves the sealing, energy-saving and sound insulation performance of the entire window.
③ Convenient device for disassembling and reassembling window sashes: self positioning installation, high installation efficiency, safe and reliable, durable.
④ Adjustable: With three-dimensional adjustable function, the window can be adjusted appropriately to achieve the best usage state.
⑤ The anti wind pressure has a significant buffering effect: it adopts an adjustable friction structure design to resist wind pressure and provide certain buffering protection for sudden window closure.
⑥ Preferred Material: The main motion friction components are made of high-quality 304 stainless steel stamped and formed, with copper sliders to ensure wear resistance, improve load-bearing capacity, quality, service life, and safety.
⑦ Rigorous design, scientific testing, and leading technology: The product undergoes rigorous fatigue and strength testing during the design phase, with a 50% increase in safety factor for all standards. Our own laboratory repeatedly tests the hardware usage frequency and lifespan, and all components adopt industry-leading design and production processes. The product quality meets European standards for similar products, with a warranty period of 10 years.
⑧ High load-bearing capacity, high safety, and high service life: With a load-bearing capacity of 100KG, it can be repeatedly opened and closed 50000 times, meeting the national standard requirement of 25000 times. The core components are made of high-quality 304 stainless steel and copper sliders, which are safer and more attentive.
⑨ High smoothness and strong corrosion resistance: Each product surface is smooth and free of burrs, and the surface quality of stainless steel stamping parts is significantly better than similar hardware. The product surface has been systematically optimized, and the neutral salt spray test of the product exceeds 1000 hours.
⑩ High cost-effectiveness: As an international brand, we always adhere to European quality while providing consumers with favorable domestic prices.
Features of hinge type internal swing hardware system
1. Scope of application:
This product is suitable for C-type European standard slots, with a load-bearing capacity of 60-80Kg.
2. Structural features and advantages:
① Anti loosening and anti sagging: The optimized serrated clamping plate structure design increases the clamping force between hinges and profiles to prevent loosening and sagging.
② No damage to the profile, easy maintenance: By increasing the clamping force through the top thread, the window sash is prevented from sagging and the profile is not damaged, making it easy to maintain the window sash in the later stage.
③ High load-bearing capacity, high safety, and high service life: The product has undergone 100000 cycles of opening and closing operations, and has undergone 1000 hours of neutral salt spray and UV testing. The core components are made of high-quality 304 stainless steel, which is safer and more attentive.
④ Preferred Material: Made of high-strength extruded aluminum alloy, high-quality 304 stainless steel shaft and pressure plate, and wear-resistant PA66 shaft sleeve processing and manufacturing.
⑤ Diverse colors and strong selectivity: Polyester powder coating, multiple colors to choose from, and color customization according to customer plans.
⑥ High installation efficiency: Loosen the hinge screws appropriately to allow the stainless steel pressure plate to extend into the groove of the profile, and then continue to tighten the screws for quick installation.
⑦ Rigorous design, scientific testing, and leading technology: The product undergoes rigorous fatigue and strength testing during the design phase, with a 50% increase in safety factor for all standards. Our own laboratory repeatedly tests the hardware usage frequency and lifespan, and all components adopt industry-leading design and production processes. The product quality meets European standards for similar products, with a warranty period of 10 years.
⑧ High smoothness and strong corrosion resistance: Each product surface is smooth and free of burrs, and the surface quality of stainless steel stamping parts is significantly better than similar hardware. The product surface has been systematically optimized, and the neutral salt spray test of the product exceeds 1000 hours.
⑨ High cost-effectiveness: As an international brand, we always adhere to European quality while providing consumers with favorable domestic prices.
Having the ability to develop aluminum alloys, we can match alloy combinations according to different performance requirements of customers, which not only meets their needs for product performance and lightweight, but also achieves cost savings.
Based on the precision and performance requirements of the product, we can independently design the production process route, which greatly improves the performance of the welded parts and ensures the dimensional accuracy of the assembly.
Having the ability to develop and modify extrusion and stamping molds, reducing mold development costs.
Having automated extrusion production lines and CNC production lines reduces labor costs.
We have advanced production lines for surface treatment such as oxidation, electrophoresis, and painting, which can meet different customer requirements while reducing equipment investment costs.
The group currently has over 150 extrusion production lines ranging from 600 to 10000 tons, with an annual production capacity of 800000 tons, of which 40% are over 2000 tons. Including various specifications of extruders ranging from 500 tons to 10000 tons, the Sixth Factory is mainly dedicated to the production of industrial profiles and automotive lightweight profiles, with sufficient production capacity to meet customers' extrusion needs of various sizes and specifications.
We have established a national level standardized testing center, which has been accredited by the China National Accreditation Service for Conformity Assessment (CNAS) and accredited by the China National Accreditation Service for Conformity Assessment (CMA); There are 13 high standard laboratories jointly established, including chemical analysis laboratory, metallographic laboratory, mechanical performance laboratory, physical performance laboratory, spectroscopy laboratory, salt spray laboratory, and aging laboratory. Key instruments and equipment are imported from countries such as the United States, Germany, and Israel.
The aluminum extrusion experience of the group has a development history of more than 20 years. After years of verification and accumulation, a rich database of data and experience has been formed, including product databases, design standards, analysis specifications DFMEA、PFMEA、 Control plan, process validation data, etc.
Language
