Hand-cranked window opener
A manual window opener generally consists of five parts: the executing component for opening the window (such as a scissor window opener), the corner connector, the operating component, the connecting rod, and the decorative cover plate
Mainly showcasing two types of windows: external swing and external suspended windows
Up and down pull up windows: mainly popular in North America, therefore also known as American pull up windows
There are generally four types of window lifting hardware, including screw type, roll type, pulley type, and heavy-duty screw type
1. Good ventilation and wide field of view
2. Sealed tightly, safe and firm
3. Easy to clean
Characteristics of the swing door hardware system
1. Scope of application:
① Minghe: Suitable for European standard C-groove, with a load-bearing capacity of up to 120KG/group, 3 can reach 150KG, meeting most door types and load-bearing requirements. Increasing the number of hinges can correspondingly increase the load-bearing capacity.
② Hidden hinge: Suitable for European standard C-groove, with a load capacity of up to 100KG, it can be used for frame and non frame leaf alignment, meeting most door types and load requirements. The back locking point can be appropriately increased with the height of the door leaf (when there is no groove on the lower rail, a visible hinge should be used).
2. Product features and advantages:
System product features:
① High security: The multi-point door lock body can be equipped with multiple locking points, providing higher safety protection and sealing performance.
② Convenient operation: By operating the handle to lift and control the inclined lock tongue, the lock cylinder controls the square lock tongue to extend and lock. Operate the lock cylinder to control the retraction of the lock tongue, and press down with the handle to unlock the angled lock tongue.
③ Multi functional adjustable function: It can be adjusted up and down, left and right, effectively solving the errors in door and window production and installation, and improving the integrity of the door.
④ Strong selectivity: Multiple door handles, visible hinges and hidden hinges to choose from, meeting customers' diverse needs.
⑤ High load-bearing capacity: The hinge can support up to 120KG per set, with 3 hinges up to 150KG. Increasing the number of hinges can correspondingly increase the load-bearing capacity.
The hidden hinge can support up to 100KG when opened at 180 ° and up to 130KG when opened at 90 °, and can be used for both frame and non frame fan leveling.
⑥ High service life: The hinge can be repeatedly opened and closed up to 150000 to 200000 times.
The hidden hinge can be opened and closed repeatedly for 80000 to 100000 times.
Characteristics of door lock body:
① There are currently two models with a center distance of 30/35mm and a hole center distance of 85mm, which are suitable for most profiles. For details, please consult our technical service personnel.
② The direction of the slanted lock tongue can be quickly changed by installing and removing the screws on the side of the lock body. Please refer to the relevant information for details.
③ The multi-point door lock body can be equipped with multiple locking points to enhance safety, protection, and anti-theft performance, and the product has strong stability.
④ Convenient operation: By operating the handle to lift and control the inclined lock tongue, the lock cylinder controls the square lock tongue to extend and lock. Operate the lock cylinder to control the retraction of the lock tongue, and press down with the handle to unlock the angled lock tongue.
⑤ The door lock repeatedly opens and closes 100000 to 150000 times.
Characteristics of lock cylinder:
Our lock cylinder specifications include 30/30, 30/50, 30/60, 30/65, 30/70, suitable for commonly used profiles:
① One knob, one key
② Two sided key
③ Please refer to the lock cylinder specification summary table for details
Instructions:
① In the product model, T is the handwheel side, and without T, it is the key side. For example, the KN100NM-A90mm60/30T lock cylinder has a total length of 90mm, with a handwheel side of 30mm and a key
The key side is 60mm;
② There are differences in terms of naming and measurement methods among different manufacturers. Please refer to our company when placing an order;
Having the ability to develop aluminum alloys, we can match alloy combinations according to different performance requirements of customers, which not only meets their needs for product performance and lightweight, but also achieves cost savings.
Based on the precision and performance requirements of the product, we can independently design the production process route, which greatly improves the performance of the welded parts and ensures the dimensional accuracy of the assembly.
Having the ability to develop and modify extrusion and stamping molds, reducing mold development costs.
Having automated extrusion production lines and CNC production lines reduces labor costs.
We have advanced production lines for surface treatment such as oxidation, electrophoresis, and painting, which can meet different customer requirements while reducing equipment investment costs.
The group currently has over 150 extrusion production lines ranging from 600 to 10000 tons, with an annual production capacity of 800000 tons, of which 40% are over 2000 tons. Including various specifications of extruders ranging from 500 tons to 10000 tons, the Sixth Factory is mainly dedicated to the production of industrial profiles and automotive lightweight profiles, with sufficient production capacity to meet customers' extrusion needs of various sizes and specifications.
We have established a national level standardized testing center, which has been accredited by the China National Accreditation Service for Conformity Assessment (CNAS) and accredited by the China National Accreditation Service for Conformity Assessment (CMA); There are 13 high standard laboratories jointly established, including chemical analysis laboratory, metallographic laboratory, mechanical performance laboratory, physical performance laboratory, spectroscopy laboratory, salt spray laboratory, and aging laboratory. Key instruments and equipment are imported from countries such as the United States, Germany, and Israel.
The aluminum extrusion experience of the group has a development history of more than 20 years. After years of verification and accumulation, a rich database of data and experience has been formed, including product databases, design standards, analysis specifications DFMEA、PFMEA、 Control plan, process validation data, etc.
Language
